Manual 37512 UG-Actuator Woodward 1 Chapter 1. General Information Introduction This manual describes the installation and operation of the UG-Actuator . Figure 1-1. The UG-Actuator Description The UG-Actuator is a proportional electro-hydraulic actuator which can be used with electronic controls which provide a 20 to 160 mA position signal. The, Manual 37512 UG – Actuator Woodward 1 Chapter 1. General Information Introduction This manual describes the installation and operation of the UG – Actuator . Figure 1-1. The UG – Actuator Description The UG – Actuator is a proportional electro-hydraulic actuator which can be used with electronic controls which provide a 20 to 160 mA position signal. The, 37512G. UG – ACTUATOR . Installation and Operation Manual . WOODWARD GOVERNOR COMPANY Manual 37512G WARNING!. Read this entire manual and all other publications pertaining to the work to be performed before installing, operating, or servicing this equipment. Practice all plant and safety instructions and precautions. Failure to follow instructions can.
Page 1 Product Manual 26580 (Revision D, 9/2018) Original Instructions UG -25 Actuator Installation and Operation Manual … Page 2 Revisions— A bold, black line alongside the text identifies changes in this publication since the last revision. Woodward reserves the right to update any portion of this publication at any time. Information provided by Woodward is.
the UG-Actuator is available with an LVDT for position feedback. The UG-Actuator uses the same cast-iron case as the UG -8 governor. The oil pump is the proven high-output Gerotor, designed to provide long life with minimal maintenance. The actuator uses standard UG -8 output shafts, power levers, power pistons, and piston links.
View 37512— UG – Actuator .pdf from ENGINEERIN D12 at Eastern Illinois University. 37512G UG – ACTUATOR Installation and Operation Manual WOODWARD GOVERNOR COMPANY Manual 37512G WARNING ! Read this, Page 1 Installation and Operation Manual UG40 Actuator Manual 37515 (Revision C) Page 2 Revisions—Text changes are indicated by a black line alongside the text. Woodward Governor Company reserves the right to update any portion of this publication at any time. Information provided by Woodward Governor Company is believed to be correct and reliable.
The UG40 Actuator uses the same cast-iron case as the UG Governor. The oil pump is the proven high-output Gerotor, designed to provide long life with minimal maintenance. The actuator uses standard UG40 output shafts, power levers, power pistons, and piston links. The base will fit any drive designed for a UG40 Governor. Maintenance, the UG – Actuator is available with an LVDT for position feedback. The UG – Actuator uses the same cast-iron case as the UG -8 governor. The oil pump is the proven high-output Gerotor, designed to provide long life with minimal maintenance. The actuator uses standard UG -8 output shafts, power levers, power pistons, and piston links.
2/2/2018 · To navigate through the Ribbon, use standard browser navigation keys. To skip between groups, use Ctrl+LEFT or Ctrl+RIGHT. To jump to the first Ribbon tab use Ctrl+[.
